| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 180.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLACK |
| INSIDE DIAMETER | 0.765 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED POLYESTER CORD OR OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| OUTSIDE DIAMETER | 0.375 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 90.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 1.600 INCHES NOMINAL EXCLUDING END FITTINGS |
| MEDIA FOR WHICH DESIGNED | AIR SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 2.500 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | HYDRAULIC SOLUTION RESISTANT AND SALT WATER RESISTANT |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SEAT NOMINAL RADIUS | 0.090 INCHES 1ST END |
| SEAT NOMINAL RADIUS | 0.090 INCHES 2ND END |
| SPECIAL FEATURES | LOCKWIRE HOLES; ALL NUTS SHALL HAVE TWO .047 DIAMETER HOLES, 180 DEGREE APART |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD CLASS | 2A 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |