| END CONNECTION DESIGN | ELBOW 1ST END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 28.0 |
| BURST TEST PRESSURE | 3600.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| INSIDE DIAMETER | 0.547 INCHES NOMINAL |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 0.344 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY-NON FIRE RESISTANT, FLARED, RUBBER |
| MAXIMUM OPERATING PRESSURE | 600.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 26.500 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 2.500 INCHES |
| NOMINAL THREAD SIZE | 0.375 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | SHALL BE FAA-TSO-C53A TYPE A CERTIFIED WITH TSO TAG ATTACHED; WHEN ORDERING IDENTIFY WITH BELL STANDARD PART NUMBER FROM THE SOURCES LISTED ON QPL OF BHTI PROCUREMENT SPECIFICATION 299-947-045 ONLY |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD CLASS | 3B 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |