| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| HYDROSTATIC TEST PRESSURE | 750.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED FABRIC AND 2ND LAYER BRAIDED WIRE AND OUTER LAYER RUBBER IMPREGNATED FABRIC |
| OUTSIDE DIAMETER | 1.312 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 375.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 141.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 3.500 INCHES |
| NOMINAL THREAD SIZE | 1.313 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND COLD RESISTANT AND FUEL RESISTANT AND VIBRATION RESISTANT AND MILDEW RESISTANT |
| SPECIAL FEATURES | ASSEMBLY FOR USE AS FUEL OR OIL LINE ON MILITARY VEHICLES, SUITABLE FOR A WIDE RANGE OF TEMPERATURES AND OPERATING ENVIRONMENTS |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| TEMP RATING | -55.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |
| TEST DATA DOCUMENT | 96906-MIL-DTL-13444G SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD SERIES DESIGNATOR | UN 1ST END |