| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC 1ST END |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER, SYNTHETIC |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED FABRIC |
| LAYER COMPOSITION AND LOCATION | 3RD LAYER BRAIDED WIRE |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC |
| THREAD CLASS | 2B 1ST END |
| TEMP RATING | -55.0 DEG FAHRENHEIT AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY, NONMETALLIC |
| CONNECTION STYLE | SWIVEL NUT WITH COMPRESSION SLEEVE 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | WATER RESISTANT AND OIL RESISTANT AND FUEL RESISTANT AND MILDEW RESISTANT AND OZONE RESISTANT |
| MEASURING METHOD AND LENGTH | 73.000 INCHES NOMINAL WORKING |
| INSIDE SURFACE CONDITION | SMOOTH |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| BURST TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| SPECIFICATION/STANDARD DATA | 96906-MS52103E GOVERNMENT SPECIFICATION |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| INSIDE DIAMETER | 0.313 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.597 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| NOMINAL THREAD SIZE | 0.5625 INCHES 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| MINIMUM INSIDE BENDING RADIUS | 1.250 INCHES |
| SEAT ANGLE | 37.0 DEGREES 1ST END |