| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 3500.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ZINC 1ST END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| HYDROSTATIC TEST PRESSURE | 1750.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.500 INCHES MINIMUM AND 0.539 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED RUBBER, SYNTHETIC AND 2ND LAYER RUBBER IMPREGNATED BRAIDED FABRIC AND 3RD LAYER BRAIDED STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC |
| MAXIMUM OPERATING PRESSURE | 875.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 33.500 INCHES MINIMUM OVERALL AND 34.500 INCHES MAXIMUM OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 2.250 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.750 INCHES 2ND END |
| NONDEFINITIVE SPEC/STD DATA | 3 TYPE AND 4 TABLE |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OZONE RESISTANT AND OIL RESISTANT AND FUEL RESISTANT AND MILDEW RESISTANT |
| OUTSIDE DIAMETER | 0.808 INCHES MINIMUM AND 0.854 INCHES MAXIMUM |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-13444E GOVERNMENT SPECIFICATION |
| TEMP RATING | -55.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B 1ST END |
| THREAD CLASS | 2B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD QUANTITY PER INCH | 16 1ST END |
| THREAD QUANTITY PER INCH | 16 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| THREAD SERIES DESIGNATOR | UNF 2ND END |