| TEMP RATING | -67.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD QUANTITY PER INCH | 14 1ST END |
| THREAD QUANTITY PER INCH | 14 2ND END |
| MAXIMUM OPERATING PRESSURE | 3500.0 POUNDS PER SQUARE INCH |
| WALL THICKNESS | 0.035 INCHES MINIMUM |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, TETRAFLUOROETHYLENE; END SWIVEL 270 DEGREES |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| THREAD CLASS | 3A 2ND END |
| THREAD CLASS | 3A 1ST END |
| INSIDE SURFACE CONDITION | SMOOTH |
| OUTSIDE DIAMETER | 1.015 INCHES MINIMUM AND 1.406 INCHES MAXIMUM |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| NOMINAL THREAD SIZE | 0.875 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.875 INCHES 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| INSIDE DIAMETER | 0.455 INCHES MINIMUM AND 0.485 INCHES MAXIMUM |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 2ND END |
| MEASURING METHOD AND LENGTH | 32.375 INCHES NOMINAL OVERALL |
| CONNECTION STYLE | SWIVEL NUT, FLARELESS 1ST END |
| CONNECTION STYLE | SWIVEL NUT, FLARELESS 2ND END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL COMP 304 ALL ENDS |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED POLYTETRAFLUOROETHYLENE |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| LAYER COMPOSITION AND LOCATION | 3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| LAYER COMPOSITION AND LOCATION | 4TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| LAYER COMPOSITION AND LOCATION | 5TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| SEAT ANGLE | 24.0 DEGREES 1ST END |
| SEAT ANGLE | 24.0 DEGREES 2ND END |
| MINIMUM INSIDE BENDING RADIUS | 6.300 INCHES |