| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL PIPE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER WRAPPED RUBBER, SYNTHETIC |
| HYDROSTATIC TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 50.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, WATER BASE AND HYDRAULIC FLUID SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES |
| NOMINAL THREAD SIZE | 1.000 INCHES 2ND END |
| NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF |
| OUTSIDE DIAMETER | 1.515 INCHES MINIMUM AND 1.609 INCHES MAXIMUM |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; HOSE FITTINGS; 1ST END IS STRAIGHT FLARE; 2ND END IS 90 DEGREE ELBOW, SWIVEL NUT, INTERNAL PIPE THREADS |
| SPECIFICATION/STANDARD DATA | SAE J517, 100R2-81343 NATIONAL STD/SPEC |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD SERIES DESIGNATOR | NPT 2ND END |
| THREAD SERIES DESIGNATOR | UN 1ST END |