| TEMP RATING | -350.0 DEG FAHRENHEIT AND 1200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD CLASS | 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 2ND END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 2700.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL HOSE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL HOSE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 2ND END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | NUTS DRILLED FOR LOCKWIRE |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| INSIDE DIAMETER | 0.350 INCHES NOMINAL |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| HYDROSTATIC TEST PRESSURE | 1350.0 POUNDS PER SQUARE INCH |
| INNER CONVEYING TUBE STYLE | ANNULAR CLOSE-PITCH CORRUGATED |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 900.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 6.000 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 5.500 INCHES |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.562 INCHES 2ND END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND ALCOHOL RESISTANT AND CORROSION RESISTANT AND FUEL RESISTANT AND OIL RESISTANT AND WATER RESISTANT |
| OUTSIDE DIAMETER | 0.600 INCHES NOMINAL |
| SPECIAL FEATURES | METAL BAND FOR IDENTIFICATION |