| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| BURST TEST PRESSURE | 250.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |
| INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER RUBBER IMPREGNATED FABRIC |
| OUTSIDE DIAMETER | 0.500 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY, FILTER OUTLET |
| MAXIMUM OPERATING PRESSURE | 50.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 26.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| NOMINAL THREAD SIZE | 0.250 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; ASSEMBLY INCLUDES 2EA P/N 30682-4-4 OR EQUAL FITTING; CLAMP 2EA P/N HC9-8 OR EQUAL; HOSE P/N 293-5 OR EQUAL (SAE J30R7); FITTINGS HAVE 0.250 IN BARB TO INSERT INTO HOSE |
| SPECIFICATION/STANDARD DATA | SAE J30R7-81343 NATIONAL STD/SPEC |
| TEMP RATING | -29.0 FAHRENHEIT AND 257.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD CLASS | 2B 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |