| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | GREEN |
| HYDROSTATIC TEST PRESSURE | 250.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC |
| OUTSIDE DIAMETER | 0.590 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 125.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 23.000 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 0.870 INCHES |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | HOSE ASSEMBLY INTERNAL SPRINGWIRE ENDS SHALL BE ATTACHED TO NIPPLE; ASSEMBLY IS RATED AT LOW PRESSURE; END FITTINGS TO MATE WITH SAE-AS4395 FOR TUBE SIZE SPECIFIED |
| TEMP RATING | -65.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |