| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| BOLT CIRCLE DIAMETER | 1.938 INCHES NOMINAL 2ND END |
| BOLT HOLE QUANTITY | 2 2ND END |
| BOLT HOLE DIAMETER | 0.270 INCHES MINIMUM AND 0.284 INCHES MAXIMUM 2ND END |
| BURST TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | RAISED 2ND END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLACK |
| FLANGE LENGTH | 2.438 INCHES NOMINAL 2ND END |
| FLANGE THICKNESS | 0.380 INCHES NOMINAL 2ND END |
| FLANGE STYLE | OVAL 2ND END |
| FLANGE WIDTH | 1.500 INCHES NOMINAL 2ND END |
| INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER HELIX CORROSION RESISTANT STEEL COIL AND 2ND LAYER BRAIDED TEXTILE YARN AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY, WATER INLET |
| PROPRIETARY CHARACTERISTICS | NPAC |
| MAXIMUM OPERATING PRESSURE | 750.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 19.500 INCHES NOMINAL OVERALL |
| MINIMUM INSIDE BENDING RADIUS | 6.000 INCHES |
| NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| OUTSIDE DIAMETER | 1.750 INCHES NOMINAL |
| RAISED FACE DIAMETER | 1.076 INCHES MINIMUM AND 1.080 INCHES MAXIMUM 2ND END |
| RAISED FACE HEIGHT | 0.500 INCHES NOMINAL 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | THE SECOND END ALSO HAS AN UNTHREADED TUBE CONNECTION LIKE DRAWING GROUP F, STYLE 2, IT IS RAISED .500" FROM THE FLANGE FACE AND HAS A DIAMETER OF 1.244". THE .137" WIDE GROOVE HAS AN OVERALL DIAMETER OF1.078" |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD SERIES DESIGNATOR | UN 1ST END |