| END CONNECTION DESIGN | ELBOW 1ST END |
| END CONNECTION DESIGN | ELBOW 2ND END |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| BOLT CIRCLE DIAMETER | 1.230 INCHES NOMINAL 1ST END |
| BOLT CIRCLE DIAMETER | 1.230 INCHES NOMINAL 2ND END |
| BOLT HOLE DIAMETER | 0.035 INCHES MINIMUM AND 0.040 INCHES MAXIMUM 1ST END |
| BOLT HOLE DIAMETER | 0.035 INCHES MINIMUM AND 0.040 INCHES MAXIMUM 2ND END |
| BOLT HOLE QUANTITY | 5 1ST END |
| BOLT HOLE QUANTITY | 5 2ND END |
| BURST TEST PRESSURE | 475.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| FLANGE OUTSIDE DIAMETER | 1.743 INCHES NOMINAL 1ST END |
| FLANGE OUTSIDE DIAMETER | 1.743 INCHES NOMINAL 2ND END |
| FLANGE THICKNESS | 0.675 INCHES NOMINAL 1ST END |
| FLANGE THICKNESS | 0.675 INCHES NOMINAL 2ND END |
| FLANGE STYLE | ROUND W / BOLT HOLES 1ST END |
| FLANGE STYLE | ROUND W / BOLT HOLES 2ND END |
| FLOW ANGLE | 108.0 DEGREES 2ND END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| HYDROSTATIC TEST PRESSURE | 285.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 1.026 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 1.250 INCHES MINIMUM AND 1.560 INCHES MAXIMUM |
| MAXIMUM OPERATING PRESSURE | 190.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 18.000 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 4.500 INCHES |
| SPECIAL FEATURES | FERRULE,SWAGE,TUBE COUPLINGS ON BOTH ENDS, THREADED EXTERNAL 1 3/4-12UN-2A, SLOTTED, P/N W83051-20 |
| TEMP RATING | -65.0 FAHRENHEIT AND 265.0 FAHRENHEIT SINGLE RESPONSE |
| VACUUM IN TORR | 20.0 |