| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| INSIDE DIAMETER | 1.406 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | CONVOLUTED |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| HYDROSTATIC TEST PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HIGH TEMPERATURE,MEDIUM PRESSURE,STRAIGHT TO STRAIGHT,FLARE TO FLARE, HOSE ASSEMBLY |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 500.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 26.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 14.000 INCHES |
| NOMINAL THREAD SIZE | 2.500 INCHES 1ST END |
| OUTSIDE DIAMETER | 2.000 INCHES NOMINAL |
| SPECIAL FEATURES | END FITTINGS ARE 300 SERIES CRES;PERMANTLY SWAGED TO HOSE;NUTS AND LAPPED JOINT FLANGES MUST SWIVEL FREELY AFTER SWAGING;FLARE TO FLARE |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD SERIES DESIGNATOR | UN 1ST END |