| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| HYDROSTATIC TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.765 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| LAYER COMPOSITION AND LOCATION | 3RD LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER SPIRALLY WRAPPED POLYAMIDE FABRIC |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ALCOHOL RESISTANT AND FUEL RESISTANT AND MILDEW RESISTANT AND WATER RESISTANT |
| OUTSIDE DIAMETER | 0.406 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY |
| MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 37.750 INCHES MINIMUM WORKING AND 38.250 INCHES MAXIMUM WORKING |
| MEDIA FOR WHICH DESIGNED | OIL, LUBRICATING, DIESTER BASE AND HYDRAULIC FLUID AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 4.625 INCHES |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC OR RUBBER, SYNTHETIC; PSI RATINGS FOR HYDRAULIC ONLY;FOR FUEL USE OPERATING PSI 1000,PROOF PSI 1500 AND BURST 8000;OIL USE OPERATING PSI IS 50,SURGE PSI 400 AND PROOF PSI 600;NEXT ASSY P/N 9330770 USED ON 1730-01-423- |
| SUPPLEMENTARY FEATURES | FITTINGS ARE ADAPTER,STRAIGHT,TUBE TO HOSE,REUSABLE,HYDRAULIC,FUEL AND OIL LINES |