| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END CONNECTION DESIGN | STRAIGHT 2ND END |
| BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL HOSE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL HOSE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 2ND END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | NONSKIVE |
| INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| HYDROSTATIC TEST PRESSURE | 7000.0 POUNDS PER SQUARE INCH |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 3500.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 20.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES |
| NOMINAL THREAD SIZE | 0.875 INCHES 1ST END |
| NOMINAL THREAD SIZE | 1.062 INCHES 2ND END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND ABRASION RESISTANT AND WEATHERPROOF |
| OUTSIDE DIAMETER | 0.908 INCHES NOMINAL |
| SEAT ANGLE | 37.0 DEGREES AND 45.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES AND 45.0 DEGREES 2ND END |
| SPECIAL FEATURES | O-RINGS NOT COMPATIBLE WITH PHOSPHATE ESTER FLUIDS |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD QUANTITY PER INCH | 12 2ND END |
| THREAD QUANTITY PER INCH | 14 1ST END |
| THREAD SERIES DESIGNATOR | JIC 1ST END |
| THREAD SERIES DESIGNATOR | JIC 2ND END |