| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | STRAIGHT 2ND END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END |
| CONNECTION TYPE | THREADED INTERNAL HOSE 1ST END |
| CONNECTION TYPE | UNTHREADED EXTERNAL HOSE 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 625.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.250 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD AND OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
| OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND VIBRATION RESISTANT |
| OUTSIDE DIAMETER | 0.469 INCHES MINIMUM AND 0.531 INCHES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSY,CYLINDER VENT |
| MAXIMUM OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 35.750 INCHES MINIMUM OVERALL AND 36.250 INCHES MAXIMUM OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 2.250 INCHES |
| NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 0.250 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | INTERFACE REQUIREMENT IAW SAE J512 TYPE 010110;UNIVERSAL FEMALE SWIVEL WITH A 0.170 MINIMUM THRU PASSAGE |
| SUPPLEMENTARY FEATURES | AFTER CLEANING ENDS OF HOSE SHALL BE PLUGGED WITH CAPS OR PLUG IAW MIL-C-5501/7 |
| TEMP RATING | -67.0 FAHRENHEIT AND 212.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |