| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| INSIDE DIAMETER | 4.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND WEATHERPROOF AND OXIDATION RESISTANT AND LIGHT RESISTANT |
| OUTSIDE DIAMETER | 4.925 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FLEXIBLE HOSE ASSY FOR NON-PROPULSION PIPING SYSTEM |
| MAXIMUM OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 38.960 INCHES MINIMUM WORKING AND 39.460 INCHES MAXIMUM WORKING |
| MEDIA FOR WHICH DESIGNED | WATER SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 30.000 INCHES |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; INCLUDES 1 DOGLEG ELBOW 90 DEGREE TY E AND 2 90 DEGREE ELBOW FLANGE 4.000 NPS TY BV;150 POUND COMMERCIAL FLANGES ON EACH END;FITTINGS MADE OF BRONZE;IS USING SPIRAL FOR REINFORCEMENT 6 LAYERS REQUIRED,IF US |
| SPECIFICATION/STANDARD DATA | MIL-H-24136/4A-64 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| SUPPLEMENTARY FEATURES | THIS ASSEMBLY USES ONE PIECE OF HOSE 26.0 INCHES LONG AND 1 PIECE OF HOSE 26.5 INCHES LONG;TOTAL LENGTH MEASUREMENTS ARE MINIMAL 1ST END TO DOGLEG AND MAXIMUM IS DOGLEG TO END END FITTING |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |