| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| INSIDE DIAMETER | 4.000 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND WEATHERPROOF AND OXIDATION RESISTANT AND LIGHT RESISTANT |
| OUTSIDE DIAMETER | 4.925 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FLEXIBLE HOSE ASSY FOR NON-PROPULSION PIPING SYSTEM |
| MAXIMUM OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 37.820 INCHES MINIMUM WORKING AND 38.960 INCHES MAXIMUM WORKING |
| MEDIA FOR WHICH DESIGNED | WATER SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 30.000 INCHES |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; INCLUDES 1 DOGLEG ELBOW 90 DEGREE TY E AND 1 90 DEGREE ELBOW FLANGE 4.000 NPS TY-BV AND 1 STRAIGHT FLANGE 4.000 NPS TY-AV;ALL FITTINGS MADE OF BRASS/BRONZE;FOR HOSE, IF USING SPIRAL FOR REINFORCEMENT 6 LAYE |
| SPECIFICATION/STANDARD DATA | MIL-H-24136/4A-64 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| SUPPLEMENTARY FEATURES | THIS ASSEMBLY USES 1 PIECE OF HOSE 37.830 INCHES LONG AND 1 PIECE OF HOSE 38.960 INCHES LONG. TOTAL LENGTH MEASUREMENTS ARE MINIMAL FROM 1ST END STRAIGHT FLANGE TO DOGLEG ELBOW, AND MAXIMUM FROM DOGLEG ELBOW TO 2ND END ELBOW FLANGE |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |