| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CRITICALITY CODE JUSTIFICATION | TEST |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | NUTS DRILLED FOR LOCKWIRE |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| INSIDE DIAMETER | 0.500 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | CONVOLUTED |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED POLYTETRAFLUOROETHYLENE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FLEX HOSE, AIR VENT |
| MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 120.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | NITROGEN, GASEOUS AND AIR SINGLE RESPONSE |
| NOMINAL THREAD SIZE | 0.750 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| NONDEFINITIVE SPEC/STD DATA | 2 ITEM |
| SPECIAL FEATURES | ASSEMBLY INCLUDES TWO 3/4-16 INCH PLUGS ATTACHED WITH STAINLESS STEEL LANYARDS; TWO LOCKWIRE HOLES ON EACH END NUT; NUTS ARE NICHOL-ALUMINUM-BRONZE ALLOY |
| SPECIFICATION/STANDARD DATA | 31442-6395308 MANUFACTURERS SPECIFICATION |
| TEMP RATING | 50.0 FAHRENHEIT AND 95.0 FAHRENHEIT SINGLE RESPONSE |
| TEST DATA DOCUMENT | 53711-NAVSEA S6430-AE-TED-010 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND 96906-MIL-D-1622 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| THREAD SERIES DESIGNATOR | UNF 2ND END |