| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| BURST TEST PRESSURE | 7000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATE 1ST END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| INSIDE DIAMETER | 0.173 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 0.304 INCHES MINIMUM AND 0.343 INCHES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY PERMANENTLY ATTACHED FITTINGS, TETRAFLUOROETHYLENE HIGH TEMPERATURE MEDIUM PRESSURE, FLARE TO FLARE |
| MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 31.875 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES |
| NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 0.3115 INCHES 1ST END |
| NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 0.3115 INCHES 2ND END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.3235 INCHES 1ST END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.3235 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.375 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.375 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, TETRAFLUOROETHYLENE |
| SPECIFICATION/STANDARD DATA | 96906-MS8005 GOVERNMENT STANDARD |
| TEMP RATING | 450.0 FAHRENHEIT SINGLE RESPONSE |
| TEST DATA DOCUMENT | 96906-MS8005 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND B81349-MIL-H-27267 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). AND B81349-MIL-F-27272 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 3A 1ST END |
| THREAD CLASS | 3A 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 2ND END |
| THREAD QUANTITY PER INCH | 24 1ST END |
| THREAD QUANTITY PER INCH | 24 2ND END |