| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 2ND END |
| CONNECTION STYLE | SWIVEL NUT, GASKET SEAL 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| INSIDE SURFACE CONDITION | CONVOLUTED |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER MOLDED POLYTETRAFLUOROETHYLENE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | FLEX HOSE,BATTERY PURGE |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 49.000 INCHES MINIMUM WORKING AND 51.000 INCHES MAXIMUM WORKING |
| MEDIA FOR WHICH DESIGNED | NITROGEN, GASEOUS AND AIR SINGLE RESPONSE |
| NOMINAL THREAD SIZE | 0.8125 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.8125 INCHES 2ND END |
| OUTSIDE DIAMETER | 0.500 INCHES NOMINAL |
| SPECIAL FEATURES | INCLUDES TWO 13/16-16 300 SERIES STAINLESS STEEL PLUGS ATTACHED WITH TWO 300 SERIES STAINLESS STEEL LANYARDS; TWO LOCKWIRE HOLES ON EACH NUT 180 DEG APART; NUTS ARE NICKEL-ALUMINUM-BRONZE ALLOY |
| SPECIAL MARKINGS | MARK USING LABEL TAG SIMILAR TO THAT DESCRIBED IN NAVSEA S6430-AE-TED-010 WITH THE FOLLOWING INFO; P/N, VENDOR/CAGE CODE, SER NO, SERVICE, SHIP ID, SYSTEM PRESSURE, HOSE SIZE, PRESS TEST DATE |
| VACUUM IN TORR | 50.8 |
| TEMP RATING | 50.0 DEG FAHRENHEIT AND 95.0 DEG FAHRENHEIT SINGLE RESPONSE |
| TEST DATA DOCUMENT | 53711-NAVSEA S6430-AE-TED-010 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| THREAD CLASS | 2B 1ST END |
| THREAD CLASS | 2B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD DIRECTION | RIGHT-HAND 2ND END |
| THREAD QUANTITY PER INCH | 16 1ST END |
| THREAD QUANTITY PER INCH | 16 2ND END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| THREAD SERIES DESIGNATOR | UN 2ND END |