| END CONNECTION DESIGN | ELBOW 1ST END |
| BURST TEST PRESSURE | 2200.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED EXTERNAL BOSS 1ST END |
| CONNECTION STYLE | EXTERNAL SEAT FOR GASKET SEAL (BOSS) 1ST END |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| HYDROSTATIC TEST PRESSURE | 1100.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.625 INCHES MINIMUM AND 0.667 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC AND 1ST LAYER BRAIDED POLYESTER CORD AND 2ND LAYER BRAIDED POLYESTER CORD |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OXIDATION RESISTANT AND LIGHT RESISTANT AND WEATHERPROOF |
| OUTSIDE DIAMETER | 1.055 INCHES MINIMUM AND 1.101 INCHES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | DOGLEG HOSE ASSEMBLY |
| MAXIMUM OPERATING PRESSURE | 550.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 34.540 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 6.500 INCHES |
| NOMINAL THREAD SIZE | 1.750 INCHES 1ST END |
| SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL; ASSEMBLY HAS 90 DEGREE ELBOW 17.270 INCH FROM EACH END |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2A 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| THREAD SERIES DESIGNATOR | UN 1ST END |