| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| BOLT HOLE DIAMETER | 0.750 INCHES NOMINAL 1ST END |
| BOLT CIRCLE DIAMETER | 4.750 INCHES NOMINAL 1ST END |
| BOLT HOLE QUANTITY | 4 1ST END |
| BURST TEST PRESSURE | 1400.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CONNECTION STYLE | PLAIN SWIVEL 1ST END |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE OUTSIDE DIAMETER | 6.000 INCHES NOMINAL 1ST END |
| FLANGE THICKNESS | 0.440 INCHES NOMINAL 1ST END |
| FLANGE STYLE | ROUND W / BOLT HOLES 1ST END |
| HYDROSTATIC TEST PRESSURE | 700.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 1.810 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC AND 1ST LAYER BRAIDED POLYESTER CORD AND 2ND LAYER BRAIDED POLYESTER CORD |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OXIDATION RESISTANT AND LIGHT RESISTANT AND WEATHERPROOF |
| OUTSIDE DIAMETER | 2.220 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | DOGLEG HOSE ASSEMBLY |
| MAXIMUM OPERATING PRESSURE | 350.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 37.000 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID AND WATER, SALT SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 13.250 INCHES |
| SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL; END MATES WITH ANSI B16.5 150 POUND FLANGE; ASSEMBLY HAS 90 DEGREE ELBOW 18.5 INCH FROM EACH END |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |