| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLUE |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| FLANGE THICKNESS | 0.345 INCHES NOMINAL 1ST END |
| INSIDE DIAMETER | 0.421 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED POLYESTER CORD AND 1ST LAYER BRAIDED POLYESTER CORD AND 2ND LAYER BRAIDED WIRE |
| OUTER COVERING ENVIRONMENTAL PROTECTION | SALT WATER RESISTANT AND OIL RESISTANT |
| OUTSIDE DIAMETER | 0.766 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE AND OIL, LUBRICATING, DIESTER BASE SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 4.260 INCHES |
| NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 0.421 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | PRE-LUB HOSE ASSEMBLY |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | REUSEABLE IDENTICAL END FITTINGS -- ADAPTER, STRAIGHT, TUBE TO HOSE (P/N 259-4111-8 ON NSN 4730-01-350-3754; HOSE, NONMETALLIC USED IS P/N AE372-8 ON NSN 4720-00-717-1701; LENGTH OF ENTIRE ASSY IS 60.000 IN; END FITTING LENGTH IS 2.780 IN EACH |
| TEMP RATING | -55.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| THREAD QUANTITY PER INCH | 16 1ST END |
| VACUUM IN TORR | 28.0 |