| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED EXTERNAL HOSE 1ST END |
| CONNECTION TYPE | THREADED EXTERNAL HOSE 2ND END |
| CONNECTION STYLE | GASKET SEAL 1ST END |
| CONNECTION STYLE | GASKET SEAL 2ND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSY NO 4 CR 98.00 2381 |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 98.000 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 0.750 INCHES |
| NOMINAL THREAD SIZE | 0.440 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.440 INCHES 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 2ND END |
| SPECIAL FEATURES | HOSE ASSY NO 4; THREAD TYPE 37 DEG - 45 DEG FLARE BOTH ENDS; HOSE CONFORMS TO STD STD 100R5; HOSE OTC CODE 2381; EACH HOSE SHALL BE INTERNALLY CLEANED AFTER ASSEMBLY; CAP ENDS OF HOSE ASSEMBLY WITH PLASTIC COVERS AFTER CLEANING TO PROTECT FROM CONTAMINATION DURING HANDLING, STORAGE AND SHIPPING; A SAMPLE ASSEMBLY SHALL BE RANDOMLY SELECTED FROM EACH LOT OF HOSE ASSEMBLIES MANUFACTURED; THE SAMPLE RATE SHALL BE A MINIMUM OF ONE HOSE ASSEMBLY FOR EACH 100 ASSEMBLIES; THE SUPPLIER SHALL PROOF TEST IAW SAE J517, FOR A PERIOD OF NOT LESS THAN 30 SECONDS AS DEFINED IN SAE J343 |
| TEMP RATING | -50.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD QUANTITY PER INCH | 12 2ND END |
| THREAD QUANTITY PER INCH | 20 1ST END |