| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| INSIDE DIAMETER | 0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC AND 1ST LAYER BRAIDED TEXTILE YARN AND 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTSIDE DIAMETER | 0.714 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY, NONMETALLIC |
| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 34.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 1.750 INCHES |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OZONE RESISTANT AND OIL RESISTANT AND FUEL RESISTANT AND VIBRATION RESISTANT AND MILDEW RESISTANT |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | FITTING SHALL BE IN ACCORDANCE WITH SAE J516 FEMALE 37 DEGREE, FLARED TYPE; FITTING THREAD 3/4-16; FITTINGS ARE REUSABLE; PROOF PRESSURE: 2000 PSI; OUTER COVER OF HOSE ASSEMBLY SHALL BE MARKED WITH A WATER RESISTANT, GASOLINE RESISTANT, AND OIL RESISTANT CONTINUOUS YELLOW STRIPE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |