| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 820.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | TAN |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED POLYAMIDE CORD AND 1ST LAYER MOLDED RUBBER, SYNTHETIC AND 2ND LAYER PLASTIC, POLYVINYL CHLORIDE |
| HYDROSTATIC TEST PRESSURE | 410.0 POUNDS PER SQUARE INCH |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 205.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 20.750 INCHES MINIMUM WORKING AND 21.250 INCHES MAXIMUM WORKING |
| MINIMUM INSIDE BENDING RADIUS | 0.750 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| OUTSIDE DIAMETER | 0.550 INCHES NOMINAL |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | MATERIALS, INNER LINER-POLYTETRAFLUOROETHYLENE, INNER TUBE-SILICON, REINFORCEMENT BRAID-POLYETHERETHERKETONE (HTX), OUTER BRAID-NOMEX (TAN); HS89-06 HOSE; FITTING MATERIAL SPEC ASTM A479 OR A276, SURFACE TREATMENT SPEC QQ-P-35; MRC ADLG EXCEPT HEX SIZE |
| SPECIAL MARKINGS | HYDRAFLOW 24984 P/N 89307HGH0210 |
| SPECIAL TEST FEATURES | DIELECTRIC REQUIREMENTS OF MIL-STD-202, METHOD 301, 1400 VDC |
| TEMP RATING | 0.0 DEG FAHRENHEIT AND 120.0 DEG FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD QUANTITY PER INCH | 16 1ST END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |