| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| BOLT CIRCLE DIAMETER | 3.120 INCHES NOMINAL 1ST END |
| BOLT HOLE DIAMETER | 0.620 INCHES NOMINAL 1ST END |
| BOLT HOLE QUANTITY | 4 1ST END |
| BURST TEST PRESSURE | 600.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | RAISED FACE FLANGE 1ST END |
| CONNECTION STYLE | RAISED SWIVEL 1ST END |
| CRITICALITY CODE JUSTIFICATION | FEAT |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE OUTSIDE DIAMETER | 4.250 INCHES NOMINAL 1ST END |
| FLANGE THICKNESS | 0.440 INCHES NOMINAL 1ST END |
| FLANGE STYLE | ROUND W / BOLT HOLES 1ST END |
| INSIDE DIAMETER | 1.375 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER AND 1ST LAYER BRAIDED FIBER AND 2ND LAYER BRAIDED FIBER |
| OUTSIDE DIAMETER | 1.750 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | DOG LEG HOSE ASSEMBLY |
| MAXIMUM OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 0.000 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | WATER SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 7.375 INCHES |
| RAISED FACE DIAMETER | 2.212 INCHES NOMINAL 1ST END |
| RAISED FACE HEIGHT | 0.250 INCHES NOMINAL 1ST END |
| SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL; ENDS ARE 150 LB FLANGE, USE GASKET TO SEAL, HAS 90 DEGREE ELBOW; HOSE LINER BUTEDIENE RUBBER; LENGTH TO BE DETERMINED DURING INSTALLATION |