| END CONNECTION DESIGN | STRAIGHT 1ST END |
| BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | THREADED INTERNAL HOSE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| OUTSIDE DIAMETER | 0.781 INCHES NOMINAL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | HOSE ASSEMBLY, RUBBER, HYDRAULIC AND PNEUMATIC, MEDIUM PRESSURE, FEMALE 37 DEGREE FLARED TUBE |
| MAXIMUM OPERATING PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 36.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | HOSE IS TYPE 1, CLASS A, WITH HEAVY COVER; WIRE BRAID LAYER IS STEEL WIRE AND THE OD IS 0.594 INCHES DIA NOMINAL;HOSE IS OIL, OZONE, AND FUNGUS RESISTANT |
| SPECIAL MARKINGS | HOSE IS TO BE EMBOSSED OR MARKED IN WHITE PERM INK ON THE LAY LINE WITH PIN, DT OF MFR (QTR AND QTR YR), CAPITAL LTRS "OZ" AND BULK HOSE MFR CAGE |
| SPECIFICATION/STANDARD DATA | 81349 - MIL-DTL-13531G 17 MAY 2006 AND MS50077E 17 MAY 2005 GOVERNMENT SPECIFICATION |
| TEMP RATING | -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |