| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 45.0 |
| BURST TEST PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 6500.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| INSIDE SURFACE CONDITION | SMOOTH |
| MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 129.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | AIR 1ST RESPONSE |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON 2ND RESPONSE |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID 3RD RESPONSE |
| MEDIA FOR WHICH DESIGNED | OIL, LUBRICATING, DIESTER BASE 4TH RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES |
| MINIMUM TENSILE STRENGTH | 3000 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT |
| SPECIAL FEATURES | BURST PRESSURE 1000PSI MEASURED AT ROOM TEMP, 6500 PSI MEASURED AT HIGH TEMP, END FITTINGS ARE CLASS 2 MADE FROM COMBINATION ALUMINUM AND CORROSION RESISTANT STEEL (CRES) |
| TEMP RATING | -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE |