|
|
|
National Stock Number:
4730-00-113-9502
Federal Supply Class:
4730
National Item Identification Number:
001139502
Description:
ELBOW,PIPE TO HOSE
Detail:
A fitting that forms an angle of less than 180 degrees (3.141 radians) from the straight flow. One connecting end has standard pipe threads or is unthreaded and designed to accommodate a pipe. The other end has standard hose threads, an incomplete part of a threaded end connection that grips the hose directly, or is unthreaded and designed to accommodate a hose. It may have side or heel inlet(s). See also ELBOW, HOSE; ELBOW, PIPE; and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
|
Manufacturer Information:
| 10086120 | A486G | NIMIKKEISTOKESKUS NCB FINLAND | | J1231 | 0U583 | SAE INTERNATIONAL | | J1231 2-4 431460S | 0U583 | SAE INTERNATIONAL | | J1231 2-4 431460S | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | J1231-2-4 430260S | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | J1231 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | SAE-J1231 | 0U583 | SAE INTERNATIONAL | | MS24519-1 | 13899 | HYDRO-FITTING MANUFACTURING CORPORATION | | MS24519-1 | 22995 | CROWN FITTING CO INC | | MS24519-1 | 50036 | MIL-CRAFT MFG. INC. | | SAE J1231 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | SAE J1231 2-4 431460S | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | SAE J1231-2-4 430260S | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS24519-1 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| MATERIAL | STEEL COMP 410 OR | | STEEL COMP 416 BODY | | STEEL CORROSION RESISTING TUBE | | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763,COND A FED SPEC 1ST MATERIAL RESPONSE OR | | QQ-S-763,COND T FED SPEC 2ND MATERIAL RESPONSE BODY | | MIL-T-8606,COND A MIL SPEC SINGLE MATERIAL RESPONSE TUBE | | CONNECTION TYPE | THREADED EXTERNAL PIPE 1ST END | | UNTHREADED EXTERNAL HOSE 2ND END | | CONNECTION STYLE | BEADED HOSE 2ND END | | NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 0.250 INCHES 2ND END | | NOMINAL PIPE SIZE ACCOMMODATED | 0.125 INCHES 1ST END | | THREAD SERIES DESIGNATOR | NPTF 1ST END | | NOMINAL THREAD SIZE | 0.125 INCHES 1ST END | | LEG LENGTH | 0.750 INCHES NOMINAL 1ST END | | 1.781 INCHES NOMINAL 2ND END | | FLOW ANGLE | 90.0 DEGREES |
|
|