|
|
|
National Stock Number:
4730-00-246-2762
Federal Supply Class:
4730
National Item Identification Number:
002462762
Description:
SLEEVE,CLINCH,TUBE FITTING
Detail:
A FLANGED CYLINDRICAL ITEM HAVING A SHARP CUTTING SURFACE ON THE INSIDE DIAMETER AT THE END OPPOSITE THE FLANGE. THE CUTTING EDGE, IN USE, IS DESIGNED TO IMBED IN THE TUBING DUE TO PRESSURE EXERTED WHEN THE OUTSIDE DIAMETER OF THE SLEEVE IS FORCED INTO AND AGAINST AN ANGULAR SEAT. THIS FIRMLY ATTACHES THE SLEEVE TO THE TUBING AND THE FLANGED END THEN SERVES AS A BEARING SURFACE FOR THE COUPLING NUT TO BRING THE TUBING INTO THE MATING FITTING.
|
Manufacturer Information:
| 190757 | 21450 | ARMY WEAPONS COMMAND ATTN AMSWE-REE-S | | 3-080115AC | 0U583 | SAE INTERNATIONAL | | J514 | 0U583 | SAE INTERNATIONAL | | 3TUS | 30780 | PARKER-HANNIFIN CORPORATION | | 3-080115AC | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | 3TUS | 98441 | PARKER HANNIFIN CORP | | MS51825-2 | 00624 | EATON AEROQUIP LLC | | MS51825-2 | 01276 | EATON-AEROQUIP INC DIV FLUID CONNECTORS PRODUCTS | | MS51825-2 | 79470 | DANA CORP WEATHERHEAD DIV | | J514 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MIL-DTL-18866 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS51825-2A | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CASEHARDENING INDICATOR | CASEHARDENED | | FLANGE OUTSIDE DIAMETER | 0.307 INCHES MINIMUM AND 0.312 INCHES MAXIMUM | | HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 0.188 INCHES NOMINAL | | MATERIAL | STEEL | | METALLIC HARDNESS RATING | 99.5 NOMINAL ROCKWELL B | | NONDEFINITIVE SPEC/STD DATA | 28 FIGURE | | OVERALL LENGTH | 0.329 INCHES MINIMUM AND 0.334 INCHES MAXIMUM | | SEAT ANGLE IN DEG | 40.0 | | SLEEVE OUTSIDE DIAMETER | 0.246 INCHES MINIMUM AND 0.249 INCHES MAXIMUM | | SPECIFICATION/STANDARD DATA | 96906-MS51825 GOVERNMENT STANDARD AND 81343-J514 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD | | STYLE DESIGNATOR | FLARELESS | | SPECIAL FEATURES | SURFACE TREATMENT IN ACCORDANCE WITH J514 |
|