| DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT | 1.284 INCHES NOMINAL |
| BODY STYLE | SHOULDER |
| CONCENTRIC HOLE DEPTH | 1.180 INCHES NOMINAL |
| CONCENTRIC HOLE DIAMETER | 0.156 INCHES NOMINAL |
| DISTANCE FROM CENTERLINE TO FLAT | 0.380 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| FIRST END CONNECTION TYPE | THREADED EXTERNAL TUBE |
| FIRST DIAMETER FROM WRENCHING FEATURE | 0.498 INCHES NOMINAL |
| FIRST END NOMINAL THREAD SIZE | 0.438 INCHES |
| FIRST END STYLE DESIGNATOR | PLAIN |
| FIRST END THREAD DIRECTION | RIGHT-HAND |
| FIRST END THREAD CLASS | 3A |
| FIRST END THREAD LENGTH | 0.526 INCHES NOMINAL |
| FIRST END THREAD SERIES DESIGNATOR | UNF |
| FIRST RADIAL FLUID HOLE DIAMETER | 0.061 INCHES MINIMUM AND 0.066 INCHES MAXIMUM |
| HEAD DIAMETER | 0.875 INCHES NOMINAL |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END | 2.036 INCHES NOMINAL |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER | 1.510 INCHES NOMINAL |
| LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER | 1.590 INCHES NOMINAL |
| OVERALL LENGTH | 2.348 INCHES NOMINAL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATERIAL | STEEL COMP 4140 |
| SECOND DIAMETER FROM WRENCHING FEATURE | 0.346 INCHES MINIMUM AND 0.356 INCHES MAXIMUM |
| SECOND END CONNECTION TYPE | THREADED INTERNAL TUBE |
| SECOND END STYLE DESIGNATOR | HIGH PRESSURE FLARE |
| SECOND END THREAD CLASS | 2B |
| SECOND END THREAD DIRECTION | RIGHT-HAND |
| SECOND END THREAD LENGTH | 0.340 INCHES NOMINAL |
| SECOND END THREAD SERIES DESIGNATOR | UNF |
| SECOND END NOMINAL THREAD SIZE | 0.250 INCHES |
| SECOND END SEAT ANGLE | 45.0 DEGREES NOMINAL |
| SPECIAL FEATURES | CHROME PLATE EXT THD AREA |
| WRENCHING FEATURE HEIGHT | 0.312 INCHES NOMINAL |
| WRENCHING FEATURE STYLE | DEE |
| SURFACE TREATMENT | CADMIUM |