4730-00-618-8360, BOLT,FLUID PASSAGE

4730-00-618-8359 CONNECTOR,MULTIPLE,FLUID PRESSUR

National Stock Number:
4730-00-618-8360

Federal Supply Class:
4730

National Item Identification Number:
006188360

Description:
BOLT,FLUID PASSAGE

Detail:
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.

Manufacturer Information:

ER01248	79470	DANA CORP WEATHERHEAD DIV
MS21940-8L	0U583	SAE INTERNATIONAL
SAE-AS18280	0U583	SAE INTERNATIONAL
MS21940-8L	96906	MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M

Techincal Specification:

DISTANCE FROM SECOND RADIAL HOLE CENTER TO END OF BOLT	0.991 INCHES NOMINAL
BODY STYLE	BODY WRENCHING
CONCENTRIC HOLE DEPTH	2.780 INCHES NOMINAL
CONCENTRIC HOLE DIAMETER	0.234 INCHES NOMINAL
DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT	1.991 INCHES NOMINAL
FIFTH DIAMETER FROM WRENCHING FEATURE	0.499 INCHES NOMINAL
FIRST DIAMETER FROM WRENCHING FEATURE	0.499 INCHES NOMINAL
FIRST END NOMINAL THREAD SIZE	0.437 INCHES
FIRST END THREAD DIRECTION	RIGHT-HAND
FIRST END THREAD CLASS	3A
FIRST END THREAD LENGTH	0.325 INCHES NOMINAL
FIRST END THREAD QUANTITY PER INCH	20
FIRST END THREAD SERIES DESIGNATOR	UNJF
FIRST RADIAL FLUID HOLE DIAMETER	0.189 INCHES NOMINAL
FOURTH DIAMETER FROM WRENCHING FEATURE	0.433 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END	2.531 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIFTH DIAMETER	2.094 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER	0.354 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FOURTH DIAMETER	1.726 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF SECOND DIAMETER	0.666 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF THIRD DIAMETER	1.354 INCHES NOMINAL
OVERALL LENGTH	3.530 INCHES NOMINAL
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/6,T4 FED SPEC SINGLE MATERIAL RESPONSE
MATERIAL	ALUMINUM ALLOY 2024
SECOND DIAMETER FROM WRENCHING FEATURE	0.433 INCHES NOMINAL
SECOND END NOMINAL THREAD SIZE	0.750 INCHES
SECOND END SEAT ANGLE	12.0 DEGREES NOMINAL
SECOND END STYLE DESIGNATOR	FLARELESS
SECOND END THREAD CLASS	3A
SECOND END THREAD DIRECTION	RIGHT-HAND
SECOND END THREAD LENGTH	0.468 INCHES NOMINAL
SECOND END THREAD SERIES DESIGNATOR	UNJF
SECOND END THREAD QUANTITY PER INCH	16
SECOND RADIAL FLUID HOLE DIAMETER	0.189 INCHES NOMINAL
WIDTH ACROSS FLATS	0.996 INCHES MINIMUM AND 1.003 INCHES MAXIMUM
WRENCHING FEATURE HEIGHT	0.437 INCHES NOMINAL
WRENCHING FEATURE STYLE	HEXAGON
SURFACE TREATMENT	ANODIZE
THIRD DIAMETER FROM WRENCHING FEATURE	0.499 INCHES NOMINAL

Click here to Register for Free 30-day Trial