|
|
|
National Stock Number:
4730-00-626-7586
Federal Supply Class:
4730
National Item Identification Number:
006267586
Description:
SLEEVE,CLINCH,TUBE FITTING
Detail:
A FLANGED CYLINDRICAL ITEM HAVING A SHARP CUTTING SURFACE ON THE INSIDE DIAMETER AT THE END OPPOSITE THE FLANGE. THE CUTTING EDGE, IN USE, IS DESIGNED TO IMBED IN THE TUBING DUE TO PRESSURE EXERTED WHEN THE OUTSIDE DIAMETER OF THE SLEEVE IS FORCED INTO AND AGAINST AN ANGULAR SEAT. THIS FIRMLY ATTACHES THE SLEEVE TO THE TUBING AND THE FLANGED END THEN SERVES AS A BEARING SURFACE FOR THE COUPLING NUT TO BRING THE TUBING INTO THE MATING FITTING.
|
Manufacturer Information:
| 03-2025 | 05083 | BACHARACH, INC. | | 4BF4-ZY | 54938 | PARKER-HANNIFIN CORPORATION | | 4FRN | 01355 | J R DOUGLASS COMPANY | | NY404-1 | 02570 | SWAGELOK CO | | 4FRN | 28968 | CIRCOR INSTRUMENTATION TECHNOLOGIES, INC. | | 4TZ-NY | 54938 | PARKER-HANNIFIN CORPORATION | | ZY404-1 | 02570 | SWAGELOK CO | | ZY404-1 | 3T9T9 | SWAGELOK CO | | NY404-1 | 3T9T9 | SWAGELOK CO |
|
Techincal Specification:
| CASEHARDENING INDICATOR | NOT CASEHARDENED | | FLANGE OUTSIDE DIAMETER | 0.359 INCHES NOMINAL | | FLANGE WIDTH | 0.050 INCHES MINIMUM AND 0.062 INCHES MAXIMUM | | HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 0.250 INCHES NOMINAL | | OVERALL LENGTH | 0.094 INCHES MINIMUM AND 0.100 INCHES MAXIMUM | | MATERIAL | PLASTIC POLYAMIDE (NYLON) | | SEAT ANGLE IN DEG | 12.0 | | SLEEVE OUTSIDE DIAMETER | 0.312 INCHES NOMINAL | | STYLE DESIGNATOR | FLARELESS |
|