| BOLT HOLE NOMINAL DIAMETER | 0.266 INCHES 2ND END |
| BOLT HOLE QUANTITY | 4 2ND END |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.565 INCHES 2ND END |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.656 INCHES 2ND END |
| CONNECTION TYPE | FLANGE 2ND END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CONNECTION TYPE | THREADED INTERNAL BOSS INLET |
| CONNECTION STYLE | GASKET SEAL (BOSS) INLET |
| FLANGE FACE DESIGN | RAISED STRAIGHT 2ND END |
| FLANGE SHAPE | RECTANGULAR WITH HOLES 2ND END |
| FLOW ANGLE | 90.0 DEGREES |
| INLET LOCATION | LOW HEEL SINGLE INLET |
| LEG LENGTH | 1.200 INCHES NOMINAL 3RD END |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS4260 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY OVERALL |
| NOMINAL LENGTH | 2.188 INCHES 2ND END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 1.250 INCHES 1ST END |
| NOMINAL THICKNESS | 0.250 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.562 INCHES INLET |
| NOMINAL WIDTH | 2.188 INCHES 2ND END |
| NOMINAL THREAD SIZE | 1.625 INCHES 1ST END |
| RAISED FACE NOMINAL DIAMETER | 1.460 INCHES 2ND END |
| RAISED FACE NOMINAL HEIGHT | 0.550 INCHES 2ND END |
| SEAT ANGLE | 45.0 DEGREES 1ST END |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE INSIDE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE |
| SURFACE TREATMENT | ANODIZE INSIDE |
| SURFACE TREATMENT | ANODIZE OUTSIDE |
| THREAD CLASS | 3B INLET |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| THREAD SERIES DESIGNATOR | UNF INLET |
| THREAD QUANTITY PER INCH | 12 1ST END |