4730-00-962-0969, BOLT,FLUID PASSAGE

National Stock Number:
4730-00-962-0969

Federal Supply Class:
4730

National Item Identification Number:
009620969

Description:
BOLT,FLUID PASSAGE

Detail:
A boltlike item having a concentric hole along the longitudinal centerline which may extend a part or the full length of the item. It has a hole(s) perpendicular to the axis, joining or passing through the concentric hole along the longitudinal centerline. The item is designed to distribute fluid, air, or lubricant through its body to a mating item, such as a CONNECTOR, MULTIPLE, FLUID PRESSURE LINE, bearing(s), bushing(s), or the like. The item must be capable of attaching to a block fitting and/or a tubing line or be designed to accommodate a FITTING, LUBRICATION. Excludes BOLT, INTERNALLY RELIEVED BODY; BLEEDER VALVE, HYDRAULIC SYSTEM; and BUSHING, MACHINE THREAD. See also PIN, VEHICULAR LEAF SPRING SHACKLE.

Manufacturer Information:

123BM40510-3	26512	NORTHROP GRUMMAN SYSTEMS CORPORATION
123BM40510-3	79RG9	NORTHROP GRUMMAN SYSTEMS CORPORATION

Techincal Specification:

DISTANCE FROM FIRST RADIAL HOLE CENTER TO END OF BOLT	1.600 INCHES NOMINAL
BODY STYLE	PLAIN
CONCENTRIC HOLE DIAMETER	0.108 INCHES MINIMUM AND 0.113 INCHES MAXIMUM
FIRST END CONNECTION TYPE	THREADED EXTERNAL TUBE
FIRST DIAMETER FROM WRENCHING FEATURE	0.498 INCHES MINIMUM AND 0.499 INCHES MAXIMUM
FIRST END NOMINAL THREAD SIZE	0.500 INCHES
FIRST END STYLE DESIGNATOR	PLAIN
FIRST END THREAD DIRECTION	RIGHT-HAND
FIRST END THREAD CLASS	3A
FIRST END THREAD LENGTH	0.453 INCHES NOMINAL
FIRST END THREAD QUANTITY PER INCH	20
FIRST END THREAD SERIES DESIGNATOR	UNF
FIRST RADIAL FLUID HOLE DIAMETER	0.127 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO BOLT END	2.570 INCHES NOMINAL
LENGTH FROM BEARING SURFACE OF WRENCHING FEATURE TO END OF FIRST DIAMETER	2.117 INCHES NOMINAL
OVERALL LENGTH	2.828 INCHES NOMINAL
MATERIAL	STEEL
MINIMUM TENSILE STRENGTH	160000 POUNDS PER SQUARE INCH
SPECIAL FEATURES	FLUSH TYPE LUBRICATION FITTING PRESS-FIT AT LONGITUDINAL HOLE
WIDTH ACROSS FLATS	0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM
WRENCHING FEATURE HEIGHT	0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM
WRENCHING FEATURE STYLE	HEXAGON
SURFACE TREATMENT	CADMIUM AND CHROMATE

Click here to Register for Free 30-day Trial