| MATERIAL | ALUMINUM ALLOY 5052 ELBOW |
| STEEL COMP 1137 OR |
| STEEL COMP 1141 NUT |
| STEEL COMP 1213 SLEEVE |
| MATERIAL DOCUMENT AND CLASSIFICATION | WW-T-700/4-0,TYPE 1 FED SPEC 1ST MATERIAL RESPONSE ELBOW |
| QQ-S-637 FED SPEC 2ND MATERIAL RESPONSE NUT |
| QQ-S-637 FED SPEC 3RD MATERIAL RESPONSE SLEEVE |
| SURFACE TREATMENT | CADMIUM NUT |
| CADMIUM SLEEVE |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2,CLASS 2 FED SPEC 2ND TREATMENT RESPONSE NUT |
| QQ-P-416,TYPE 2 FED SPEC 3RD TREATMENT RESPONSE SLEEVE |
| MEDIA FOR WHICH DESIGNED | FLUID SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| MAXIMUM OPERATING TEMP | 275.0 DEG FAHRENHEIT SINGLE RESPONSE |
| INLET LOCATION | HIGH HEEL SINGLE INLET |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| UNTHREADED EXTERNAL TUBE 2ND END |
| UNTHREADED EXTERNAL TUBE INLET |
| CONNECTION STYLE | DOUBLE COMPRESSION (TUBE) 1ST END |
| PLAIN (TUBE) 2ND END |
| PLAIN (TUBE) INLET |
| SEAT NOMINAL RADIUS | 0.0275 INCHES 1ST END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.500 INCHES 1ST END |
| 0.500 INCHES 2ND END |
| 0.375 INCHES INLET |
| THREAD SERIES DESIGNATOR | UNJF 1ST END |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| THREAD CLASS | 3B 1ST END |
| TUBING WALL NOMINAL THICKNESS FOR WHICH DESIGNED | 0.035 INCHES 2ND END |
| 0.035 INCHES INLET |
| LEG LENGTH | 2.350 INCHES NOMINAL 1ST END |
| 4.500 INCHES NOMINAL 2ND END |
| 1.900 INCHES NOMINAL INLET |
| FLOW ANGLE | 90.0 DEGREES |
| THE MANUFACTURERS DATA | |
| MANUFACTURERS CODE | 76823 |
| DESIGN CONTROL REFERENCE | 14-57214-1 |