| BOLT HOLE NOMINAL DIAMETER | 0.286 INCHES 2ND END |
| BOLT HOLE QUANTITY | 4 2ND END |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.132 INCHES 2ND END |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.132 INCHES 2ND END |
| CONNECTION TYPE | FLANGE 2ND END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| CONNECTION STYLE | FLARED (TUBE) 1ST END |
| FLANGE FACE DESIGN | PLAIN 2ND END |
| FLANGE SHAPE | RECTANGULAR 2ND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6,T6 FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-A-225/4,T6 FED SPEC 2ND MATERIAL RESPONSE OVERALL |
| MATERIAL | ALUMINUM ALLOY 2024 OVERALL OR ALUMINUM ALLOY 2014 OVERALL |
| PROPRIETARY CHARACTERISTICS | PACS |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 1.750 INCHES 1ST END |
| NOMINAL LENGTH | 1.695 INCHES 2ND END |
| NOMINAL OVERALL LENGTH | 1.864 INCHES |
| NOMINAL THICKNESS | 0.130 INCHES 2ND END |
| NOMINAL WIDTH | 1.695 INCHES 2ND END |
| NOMINAL THREAD SIZE | 2.312 INCHES 1ST END |
| RAISED FACE NOMINAL DIAMETER | 0.910 INCHES 2ND END |
| RAISED FACE NOMINAL HEIGHT | 0.369 INCHES 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | GROOVE 0.148 IN. DEEP ON OD OF RAISED FACE OF FLANGE; FLANGE TO GROOVE CENTER 0.223 IN. |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TYPE 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OVERALL |
| THREAD CLASS | 2A 1ST END |
| THREAD QUANTITY PER INCH | 16 1ST END |
| THREAD SERIES DESIGNATOR | UNS 1ST END |