| CONNECTION STYLE | SWIVEL NUT, FLARE (TUBE) STYLE 3 OPTIONAL END 1ST END |
| CONNECTION TYPE | THREADED EXTERNAL PIPE 3RD END |
| CONNECTION STYLE | PLAIN (PIPE) 2ND END |
| CONNECTION STYLE | PLAIN (PIPE) 3RD END |
| CONNECTION TYPE | THREADED INTERNAL PIPE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| LEG LENGTH | 1.090 INCHES NOMINAL 3RD END |
| LEG LENGTH | 1.160 INCHES NOMINAL 1ST END |
| LEG LENGTH | 0.880 INCHES NOMINAL 2ND END |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| MATERIAL | STEEL COMP 304 OR STEEL COMP 316 OVERALL |
| MAXIMUM OPERATING TEMP | 165.0 FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 1ST END |
| NOMINAL THREAD SIZE | 0.250 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.250 INCHES 3RD END |
| NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| TEST DATA DOCUMENT | 18876-10159214 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD CLASS | 2B 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| THREAD SERIES DESIGNATOR | NPTF 2ND END |
| THREAD SERIES DESIGNATOR | NPTF 3RD END |