4730-01-174-4760 ADAPTER,STRAIGHT,TUBE TO BOSS Index 4720-01-174-4762 HOSE ASSEMBLY,NONMETALLIC

National Stock Number:
4730-01-174-4761

Federal Supply Class:
4730

National Item Identification Number:
011744761

Description:
ELBOW,TUBE TO BOSS

Detail:
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.


Manufacturer Information:
0098-LL-TJ2-452953711NAVAL SEA SYSTEMS COMMAND
3159369A53711NAVAL SEA SYSTEMS COMMAND
518783715090RAYTHEON COMPANY
51878372T164CUSTOM SERVICE CO
518783753711NAVAL SEA SYSTEMS COMMAND


Techincal Specification:
CONNECTION TYPETHREADED EXTERNAL TUBE 1ST END
CONNECTION TYPETHREADED INTERNAL BOSS 2ND END
CONNECTION STYLECAP SOCKET (HOSE) 2ND END
CONNECTION STYLEFLARED (TUBE) 1ST END
FLOW ANGLE90.0 DEGREES
LEG LENGTH0.875 INCHES NOMINAL 1ST END
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED0.500 INCHES 1ST END
NOMINAL THREAD SIZE0.562 INCHES 1ST END
NOMINAL THREAD SIZE0.562 INCHES 2ND END
REDUCED PASSAGE NOMINAL INSIDE DIAMETER0.302 INCHES 1ST END
SURFACE TREATMENTPHOSPHATE OVERALL
TEST DATA DOCUMENT53711-5187837 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING)
THREAD CLASS2A 1ST END
THREAD CLASS3B 2ND END
THREAD SERIES DESIGNATORUNF 2ND END
THREAD SERIES DESIGNATORUNF 1ST END


Click here to Register for Free 30-day Trial