|
|
|
National Stock Number:
4730-01-189-4793
Federal Supply Class:
4730
National Item Identification Number:
011894793
Description:
SLEEVE,CLINCH,TUBE FITTING
Detail:
A FLANGED CYLINDRICAL ITEM HAVING A SHARP CUTTING SURFACE ON THE INSIDE DIAMETER AT THE END OPPOSITE THE FLANGE. THE CUTTING EDGE, IN USE, IS DESIGNED TO IMBED IN THE TUBING DUE TO PRESSURE EXERTED WHEN THE OUTSIDE DIAMETER OF THE SLEEVE IS FORCED INTO AND AGAINST AN ANGULAR SEAT. THIS FIRMLY ATTACHES THE SLEEVE TO THE TUBING AND THE FLANGED END THEN SERVES AS A BEARING SURFACE FOR THE COUPLING NUT TO BRING THE TUBING INTO THE MATING FITTING.
|
Manufacturer Information:
| 21922-2 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | 4730PL1659349 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | AS18280 | 0U583 | SAE INTERNATIONAL | | AS21922 | 0U583 | SAE INTERNATIONAL | | AS21922 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | AS18280 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS21922-2 | 0U583 | SAE INTERNATIONAL | | SAE-AS18280 | 0U583 | SAE INTERNATIONAL | | MS21922-2 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC | | MS21922-2 | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CASEHARDENING INDICATOR | NOT CASEHARDENED | | FLANGE WIDTH | 0.062 INCHES MINIMUM AND 1.000 INCHES MAXIMUM | | FLANGE OUTSIDE DIAMETER | 0.203 INCHES NOMINAL | | HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 0.125 INCHES NOMINAL | | MATERIAL DOCUMENT AND CLASSIFICATION | FED STD 66, COMP 12L14 FED STD 2ND MATERIAL RESPONSE | | MATERIAL | STEEL OR STEEL COMP 12L14 | | OVERALL LENGTH | 0.410 INCHES NOMINAL | | SEAT ANGLE IN DEG | 12.0 | | SLEEVE OUTSIDE DIAMETER | 0.165 INCHES MINIMUM AND 0.175 INCHES MAXIMUM | | STYLE DESIGNATOR | FLARELESS | | SURFACE TREATMENT | CADMIUM |
|
|