|
|
|
National Stock Number:
4730-01-472-9527
Federal Supply Class:
4730
National Item Identification Number:
014729527
Description:
ELBOW,TUBE TO BOSS
Detail:
A fitting that forms an angle of less that 180 degrees (3.141 radians) from a straight flow. One connecting end has machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. The other end has external or internal machine threads (straight threads other than pipe or hose series) and is designed to facilitate a gasket, preformed packing, washer, or the like, to form a seal at the boss. It may have side or heel inlet(s). It is designed to connect a tube or tube fitting to a boss or boss fitting on items such as tanks, housings, valve fittings, or the like.
|
Manufacturer Information:
| MIL-DTL-18866 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | MS51527A16Z | 96906 | MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M |
|
Techincal Specification:
| CONNECTION STYLE | FLARED (TUBE) 1ST END | | CONNECTION STYLE | PLAIN (PIPE) 2ND END | | CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END | | CONNECTION TYPE | THREADED INTERNAL PIPE 2ND END | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 1ST END | | NOMINAL THREAD SIZE | 0.562 INCHES 1ST END | | NOMINAL THREAD SIZE | 0.562 INCHES 2ND END | | LEG LENGTH | 1.220 INCHES MINIMUM 1ST END AND 1.280 INCHES MAXIMUM 1ST END | | LEG LENGTH | 1.220 INCHES MINIMUM 2ND END AND 1.280 INCHES MAXIMUM 2ND END | | MATERIAL | STEEL OVERALL OR STEEL CORROSION RESISTING OVERALL | | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE | | SEAT ANGLE | 37.0 DEGREES 1ST END | | THREAD CLASS | 2A 1ST END | | THREAD CLASS | 2A 2ND END | | THREAD SERIES DESIGNATOR | UNF 1ST END | | THREAD SERIES DESIGNATOR | UNF 2ND END | | SPECIFICATION/STANDARD DATA | 96906-MS51527 GOVERNMENT STANDARD | | SURFACE TREATMENT | ZINC OVERALL |
|
|