|
|
|
National Stock Number:
4730-01-473-6612
Federal Supply Class:
4730
National Item Identification Number:
014736612
Description:
SLEEVE,CLINCH,TUBE FITTING
Detail:
A FLANGED CYLINDRICAL ITEM HAVING A SHARP CUTTING SURFACE ON THE INSIDE DIAMETER AT THE END OPPOSITE THE FLANGE. THE CUTTING EDGE, IN USE, IS DESIGNED TO IMBED IN THE TUBING DUE TO PRESSURE EXERTED WHEN THE OUTSIDE DIAMETER OF THE SLEEVE IS FORCED INTO AND AGAINST AN ANGULAR SEAT. THIS FIRMLY ATTACHES THE SLEEVE TO THE TUBING AND THE FLANGED END THEN SERVES AS A BEARING SURFACE FOR THE COUPLING NUT TO BRING THE TUBING INTO THE MATING FITTING.
|
Manufacturer Information:
| 7D0497 | 88277 | THE BOEING COMPANY | | 7D0497-06 | 88277 | THE BOEING COMPANY | | DME40P06 | 14798 | DESIGNED METAL CONNECTIONS INC |
|
Techincal Specification:
| FLANGE OUTSIDE DIAMETER | 0.527 INCHES MINIMUM AND 0.531 INCHES MAXIMUM | | HOSE/TUBE OUTSIDE DIAMETER FOR WHICH DESIGNED | 0.375 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING | | III APPLICATION/FUNCTION | HYDRAULIC | | III PART NAME ASSIGNED BY CONTROLLING AGENCY | SLEEVE,TUBE-FLARELESS,PUSH RING SWAGE STYLE | | III SUPPLEMENTARY FEATURES | PUSH RING WITH TWO SWAGE GROOVE;THE FLARELESS SLEEVE USED IN CONJUNCTION WITH THE TABULATED B-NUTS, SHALL MATE WITH FITTING ENDS IAW MS33514,MS33515,AS4375, AND AS4377 | | PROPRIETARY CHARACTERISTICS | NPAC | | OVERALL LENGTH | 0.430 INCHES MINIMUM AND 0.440 INCHES MAXIMUM | | SEAT ANGLE IN DEG | 37.0 | | SLEEVE OUTSIDE DIAMETER | 0.421 INCHES NOMINAL | | SPECIAL FEATURES | LUBRICTION: SOLID FILM LUBRICANT ON EXTERNAL SURFACE; ASSEMBLY WITH B-NUT P/N 7D0504T06; TUBE INSIDE DIAMETER0.380; OPERATING PRESSURE 4000.0;OPERATING TEMPERTURE MINUS 65 DEG F TO PLUS275 DEG F | | STYLE DESIGNATOR | FLARELESS | | SURFACE TREATMENT | PASSIVATE |
|
|