|
|
|
National Stock Number:
4730-01-476-4646
Federal Supply Class:
4730
National Item Identification Number:
014764646
Description:
ELBOW,TUBE
Detail:
A fitting that forms an angle of less than 180 degrees (3.141 radians) from a straight flow. Both connecting ends have machine threads (straight threads other than pipe or hose series) designed to accommodate a tube or is unthreaded and designed to accommodate a tube. It may have side or heel inlet(s). See also ELBOW, PIPE and CONNECTOR, MULTIPLE, FLUID PRESSURE LINE.
|
Manufacturer Information:
| 110-191-12 | 00624 | EATON AEROQUIP LLC | | 110-191-12 | 01673 | SPS TECHNOLOGIES, LLC | | 110-191-12 | 30974 | AEROFIT, LLC | | 110-191-12 | 50599 | PARKER-HANNIFIN CORPORATION | | 110-191-12 | 97499 | BELL TEXTRON INC |
|
Techincal Specification:
| MATERIAL | TITANIUM ALLOY BODY | | TITANIUM ALLOY NUT | | STEEL COMP 302 TUBE | | SUPPLEMENTARY FEATURES | MATERIAL: NUT, 6AL-4V TITANIUM PER AMS 4965,BODY:6AL-4V TITANIUM PER AMS 4965, WIRE: 302 CRES PER AMS 5637, FINISH: NUT, COATED INTERNALLY WITH SOLID FILM LUBE PER MIL-L-46010 TYPE I, BODY: CONCAVE SEALING SURFACE ON MALE END COATED WITH SOLID FILM LUBE PER MIL-L-46010 TYPE I, WIRE: COATED WITH SOLID FILM LUBE PER MIL-L-46010 TYPE I | | SURFACE TREATMENT | LUBRICANT BODY | | LUBRICANT NUT | | LUBRICANT TUBE | | MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | MAXIMUM OPERATING TEMP | -65.0 DEG FAHRENHEIT 1ST RESPONSE | | 275.0 DEG FAHRENHEIT 2ND RESPONSE | | NOMINAL WIDTH ACROSS FLATS | 1.125 INCHES 1ST END | | THREAD SERIES DESIGNATOR | UNJ 1ST END | | NOMINAL THREAD SIZE | 1.000 INCHES 1ST END | | THREAD QUANTITY PER INCH | 16 1ST END | | FLOW ANGLE | 45.0 DEGREES | | BEND CENTER TO CENTER NOMINAL DISTANCE | 1.004 INCHES | | SPECIAL TEST FEATURES | TUBE SIZE: .750",OPERATING PRESSURE: 5,000PSI, PROOF PRESSURE: 10,000PSI, BURST PRESSURE: 20,000PSI, OPERATING TEMPERATURE RANGE: -65F TO 275F | | CRITICALITY CODE JUSTIFICATION | AGAV | | PART NAME ASSIGNED BY CONTROLLING AGENCY | FITTING,ELBOW,45(DEGREES),DYNAMIC BEAM SEAL,SWIVEL NUT,5000PSI | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 97499 | | MFR SOURCE CONTROLLING REFERENCE | 110-191-12 |
|
|