| BOLT HOLE NOMINAL DIAMETER | 3.000 INCHES 1ST END |
| BOLT HOLE NOMINAL DIAMETER | 3.000 INCHES 2ND END |
| BOLT HOLE QUANTITY | 12 1ST END |
| BOLT HOLE QUANTITY | 12 2ND END |
| BOLT CIRCLE NOMINAL DIAMETER | 7.500 INCHES 1ST END |
| BOLT CIRCLE NOMINAL DIAMETER | 7.500 INCHES 2ND END |
| CONNECTION TYPE | FLANGE 1ST END |
| CONNECTION TYPE | FLANGE 2ND END |
| FLANGE FACE DESIGN | RAISED STRAIGHT 1ST END |
| FLANGE FACE DESIGN | RAISED STRAIGHT 2ND END |
| FLANGE SHAPE | ROUND WITH HOLES 1ST END |
| FLANGE SHAPE | ROUND WITH HOLES 2ND END |
| LEG LENGTH | 10.440 INCHES NOMINAL 3RD END |
| LEG LENGTH | 6.000 INCHES NOMINAL 1ST END |
| LEG LENGTH | 6.000 INCHES NOMINAL 2ND END |
| MATERIAL | STEEL OVERALL |
| MAXIMUM OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| PROPRIETARY CHARACTERISTICS | PACS |
| NOMINAL OUTSIDE DIAMETER | 9.000 INCHES 1ST END |
| NOMINAL OUTSIDE DIAMETER | 9.000 INCHES 2ND END |
| SPECIAL FEATURES | THRU HOLE THREAD SERIES IS NPS |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | FED-STD-595 FED STD 1ST TREATMENT RESPONSE OVERALL AND MIL-P-53030 MIL SPEC 2ND TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | PAINT OVERALL AND PRIMER OVERALL |