| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | CHEMICAL CONVERSION COAT PER MIL-C-5541, CLASS IA MIL SPEC 1ST TREATMENT RESPONSE OVERALL |
| SURFACE TREATMENT | ANODIZE OUTSIDE |
| SURFACE TREATMENT | PAINT OVERALL |
| THREAD CLASS | 3A 3RD END |
| THREAD CLASS | 3A 1ST END BULKHEAD |
| THREAD CLASS | 3A 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 1ST END BULKHEAD |
| THREAD SERIES DESIGNATOR | UNJF 2ND END |
| THREAD SERIES DESIGNATOR | UNJF 3RD END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END BULKHEAD |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 3RD END |
| CONNECTION STYLE | FLARELESS (TUBE) 1ST END BULKHEAD |
| CONNECTION STYLE | FLARELESS (TUBE) 2ND END |
| CONNECTION STYLE | FLARELESS (TUBE) 3RD END |
| FLOW ANGLE | 90.0 DEGREES |
| LEG LENGTH | 0.961 INCHES NOMINAL 2ND END |
| LEG LENGTH | 1.711 INCHES NOMINAL 1ST END BULKHEAD |
| LEG LENGTH | 1.086 INCHES NOMINAL 3RD END |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS4141 OR AMS-QQ-A-367 OR AMS-QQ-225/9 OR 7075-T7351 PER AMS 4124 AND M-21 FED STD ALL MATERIAL RESPONSES OVERALL |
| MATERIAL | ALUMINUM ALLOY 7075 OVERALL |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | TEE, BULKHEAD ON RUN, FLARELESS, ALUMINUM, REDUCED ENVELOPE, STANDARD |
| PROPRIETARY CHARACTERISTICS | PACS |
| MAXIMUM OPERATING PRESSURE | 600.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES 2ND END |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 1ST END BULKHEAD |
| NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.375 INCHES 3RD END |
| NOMINAL THREAD SIZE | 0.437 INCHES 2ND END |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END BULKHEAD |
| NOMINAL THREAD SIZE | 0.562 INCHES 3RD END |
| SPECIAL FEATURES | PORT 1 FITTING END PER AS4377 STYLE S, EXCEPT SEE STANDARD; PORT 2 & 3 FITTING END PER AS4375 STYLE E, EXCEPT SEE STANDARD; ALSO MATL FINISH OUTSIDE IS ANODIZED AND DUPLEX SEALED |
| SPECIFICATION/STANDARD DATA | 30974 - 1721 MANUFACTURERS STANDARD |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | ANODIZE PER MIL-A-8625, TYPE II, CLASS 2 MIL SPEC 2ND TREATMENT RESPONSE OUTSIDE |