|
|
|
National Stock Number:
4730-01-499-3724
Federal Supply Class:
4730
National Item Identification Number:
014993724
Description:
NIPPLE,TUBE
Detail:
A straight, one-piece fitting used to join a tube or tube fitting to another tube or tube fitting. It may have any type externally threaded tube connections of the same size on both ends and is usually shaped externally at the center to accommodate a wrench. It may include nuts, sleeves, and/or grommets.
|
Manufacturer Information:
| 100208 | 2J641 | DH INSTRUMENTS INC. | | 60-HM4-6 | 07097 | GRACO HIGH PRESSURE EQUIPMENT INC. | | 60-HM4-6-316 | 07097 | GRACO HIGH PRESSURE EQUIPMENT INC. |
|
Techincal Specification:
| CONNECTION TYPE | THREADED EXTERNAL TUBE ALL ENDS | | CONNECTION STYLE | FLARED (TUBE) ALL ENDS | | PART NAME ASSIGNED BY CONTROLLING AGENCY | CONED AND THREADED NIPPLE | | MATERIAL | STEEL COMP 316 OVERALL | | MAXIMUM OPERATING PRESSURE | 60000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE | | NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED | 0.250 INCHES ALL ENDS | | NOMINAL OVERALL LENGTH | 6.000 INCHES | | NOMINAL THREAD SIZE | 0.250 INCHES ALL ENDS | | SEAT ANGLE | 59.0 DEGREES ALL ENDS | | SPECIAL FEATURES | OD 0.250, ID 0.083; THREADS ARE LEFT HAND; CAGE 2J641 CALLS THIS A NIPPLE, SS, DH500, 2.75 IN. | | STYLE DESIGNATOR | FLARED W/ OUT WRENCHING FACILITY | | THREAD CLASS | 2A ALL ENDS | | THREAD SERIES DESIGNATOR | UNF ALL ENDS | | THREAD QUANTITY PER INCH | 28 ALL ENDS |
|
|