| LEG LENGTH | 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM 2ND END |
| LEG LENGTH | 1.649 INCHES MINIMUM AND 1.669 INCHES MAXIMUM 1ST END |
| LEG LENGTH | 0.915 INCHES MINIMUM AND 0.935 INCHES MAXIMUM 3RD END |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4965 ASSN STD SINGLE MATERIAL RESPONSE BODY |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS 4965 ASSN STD SINGLE MATERIAL RESPONSE NUT |
| MATERIAL | TITANIUM ALLOY UNS R56400 BODY |
| MATERIAL | TITANIUM ALLOY UNS R56400 NUT |
| MAXIMUM OPERATING TEMP | 275.0 FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 5000.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| NOMINAL THREAD SIZE | 0.438 INCHES 3RD END |
| NOMINAL THREAD SIZE | 1.000 INCHES 1ST END |
| NOMINAL THREAD SIZE | 1.000 INCHES 2ND END |
| SPECIAL FEATURES | ADDITIONAL MATERIAL: WIRE - CRES IN ACCORDANCE WITH AMS 5637;NUT, WIRE, AND SEAL SURFACE OF MALE END OF BODY SHALL BE COATED WITH SOLID FILM LUBRICANT PER AS5272 |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | TEE-REDUCER,SWIVEL NUT ON RUN AND SIDE, 5000 PSI |
| THREAD CLASS | 3A 2ND END |
| THREAD CLASS | 3A 3RD END |
| THREAD CLASS | 3B 1ST END |
| THREAD SERIES DESIGNATOR | UNJ 1ST END |
| THREAD SERIES DESIGNATOR | UNJ 2ND END |
| THREAD SERIES DESIGNATOR | UNJ 3RD END |
| THREAD QUANTITY PER INCH | 16 2ND END |
| THREAD QUANTITY PER INCH | 16 1ST END |
| THREAD QUANTITY PER INCH | 24 3RD END |