| BOLT HOLE NOMINAL DIAMETER | 0.205 INCHES 1ST END |
| BOLT HOLE QUANTITY | 4 1ST END |
| CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.312 INCHES 1ST END |
| CONNECTION STYLE | SHOULDERED (HOSE) 1ST END |
| CONNECTION STYLE | SWIVEL NUT, COMPRESSION (TUBE) 2ND END |
| CONNECTION STYLE | SWIVEL NUT, COMPRESSION (TUBE) 3RD END |
| CONNECTION TYPE | FLANGE 1ST END |
| CONNECTION TYPE | THREADED EXTERNAL TUBE 2ND END |
| FLANGE FACE DESIGN | PLAIN 1ST END |
| FLOW ANGLE | 90.0 DEGREES |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/6 FED SPEC 2ND MATERIAL RESPONSE NUT |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC 1ST MATERIAL RESPONSE BODY |
| MATERIAL | ALUMINUM ALLOY 2024 TAILPIECE |
| MATERIAL | STEEL COMP 304 BODY |
| MEDIA FOR WHICH DESIGNED | FLUID SINGLE RESPONSE |
| NOMINAL OUTSIDE DIAMETER | 0.903 INCHES 1ST END |
| NOMINAL OUTSIDE DIAMETER | 1.062 INCHES 2ND END |
| NOMINAL OUTSIDE DIAMETER | 1.062 INCHES 3RD END |
| NOMINAL THICKNESS | 0.250 INCHES 1ST END |
| NOMINAL WIDTH | 1.500 INCHES 2ND END |
| NOMINAL WIDTH | 1.500 INCHES 3RD END |
| NOMINAL WIDTH | 1.750 INCHES 1ST END |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625 MIL SPEC SINGLE TREATMENT RESPONSE NUT |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE BODY |
| SURFACE TREATMENT | ANODIZE NUT |
| SURFACE TREATMENT | PASSIVATE BODY |
| THREAD CLASS | 3A 2ND END |
| THREAD CLASS | 3A 3RD END |
| THREAD SERIES DESIGNATOR | UNJ 2ND END |
| THREAD QUANTITY PER INCH | 12 2ND END |
| THREAD QUANTITY PER INCH | 12 3RD END |